{"id":69896,"date":"2020-01-23T00:00:00","date_gmt":"2020-01-23T00:00:00","guid":{"rendered":"http:\/\/wordpress.home\/?page_id=69896"},"modified":"2021-06-14T17:43:56","modified_gmt":"2021-06-14T15:43:56","slug":"large-sewage-treatment-plant-as-energy-supplier-augsburg-sewage-treatment-plant-uses-three-mwm-gas","status":"publish","type":"post","link":"https:\/\/www.mwm.net\/en\/news\/news-releases\/large-sewage-treatment-plant-as-energy-supplier-augsburg-sewage-treatment-plant-uses-three-mwm-gas\/","title":{"rendered":"Large Sewage Treatment Plant as Energy Supplier: Augsburg Sewage Treatment Plant Uses Three MWM Gas Engines to Produce Power for More Than 800 Households from Wastewater"},"content":{"rendered":"

Mannheim, January 23, 2020<\/p>\n

With a wastewater volume of about 100,000 m3<\/sup>\/day, the sewage treatment plant of the city of Augsburg is Bavaria’s fourth-largest sewage treatment plant. For the wastewater treatment and the energy supply of the internal infrastructure and other building technology, the sewage treatment plant needs about 14 to 15 million kWh of power a year. This corresponds to the consumption of a town of about 15,000 inhabitants. To ensure the energy supply of the sewage treatment plant, an efficient power generation system<\/b> and effective energy management<\/b> are a must.\u00a0<\/p>\n

\"The<\/p>\n

\n

With a wastewater volume of about 100,000 m3<\/sup>\/day the sewage treatment plant in Augsburg is Bavaria’s fourth-largest sewage treatment plant and relies on an efficient energy management. (Photo: Kl\u00e4rwerk Augsburg)<\/p>\n<\/div>\n

Heat and Power Independence Thanks to Conversion of the Cogeneration Power Plants with Highly Efficient MWM Gas Engines<\/h2>\n

In 2008 and 2011, two MWM gas engines<\/b>\u2014a TCG 2020 V16<\/b> and a TCG 2020 V12<\/b>\u2014had already been installed in the Augsburg sewage treatment plant. Since then, these two gensets had been used for the standard operation for four to five thousand hours a year. Another older MWM engine served as fallback. Thus, the sewage treatment plant had already achieved heat and power independence<\/b>, and a power surplus of about 20 percent could be produced every year.<\/p>\n

At the end of 2017, the third gas engine, too, was replaced with an MWM TCG 2020 V12, bringing the plant’s total electrical efficiency to more than 40 percent. For the year 2018, the result was a power surplus of about one third in relation to the internal demand.<\/p>\n

\"The<\/p>\n

\n

Following the replacement of the engines of the second and then of the third cogeneration power plant with MWM gas engines, the internal power production underwent a significant increase. (The internal production slump after the installation of the first new cogeneration power plant in 2009 had operational reasons. Graphic: Kl\u00e4rwerk Augsburg)<\/p>\n<\/div>\n

Conversion of 7 Million Cubic Meters of Sewage Gas a Year<\/h2>\n

In the three digesters with a total volume of 27,000 m3<\/sup>, about 7 million m3<\/sup> of sewage gas are produced every year and are used as fuel for the three gas engines. A membrane gas storage unit with a capacity of 4,000 m3<\/sup> serves as the buffer between the generation and the consumption. In a biological reactor, the sewage gas is scrubbed to remove the hydrogen sulfide, dried, and cleaned in active carbon filters before it is fed into the gas engines. This prevents yearly emissions of about four tons of sulfur along with the exhaust gas from the engines<\/p>\n

Augsburg Sewage Treatment Plant One of Europe’s Leading Facilities in Terms of Total Efficiency and Degree of Self-Sufficiency<\/h2>\n

At the Augsburg sewage treatment plant, most of the power is produced by the three MWM gas engines<\/b>. Additionally, the sewage treatment plant has a downstream turbine and a PV system that is distributed over 16 plant building roofs. In this way, a total of about 18 million kWh were produced in 2019. The internal demand amounted to 14 million kWh. In addition to power, the combined heat and power (CHP) plants<\/b> generate about 15 million kWh of heat, which is used for heating the digesters and the other heat needs of the processes and plant buildings. Thanks to the high level of efficiency of the MWM gas engines, the efficient operation, and the good energy management, the Augsburg sewage treatment plant is one of Europe’s top wastewater treatment plants, both in terms of its overall effectiveness (power consumption per population equivalent) and in terms of its degree of self-sufficiency (ratio of power produced to power consumed).<\/p>\n

MWM TCG 2020 Gas Engines: Best Electrical and Thermal Efficiency Levels, Flexible Utilization<\/h2>\n

The MWM TCG 2020 gas engines are custom-tailored to the challenges of a dynamic market setting. The MWM gas engines in the output range from 1,000 to 2,000 kWel<\/sub> fulfill the elevated requirements of a broad application spectrum and ensure efficiency, reliability, flexibility, environmental compatibility, low TCO, and high profitability.<\/p>\n

\"MWM<\/p>\n

\n

MWM gas engines can be used in a flexible way for all gas types, including sewage gas, natural gas, biogas, landfill gas and mine gas. (Photo: R\u00fcdiger Dechantsreiter, Caterpillar Energy Solutions GmbH, Mannheim\/Germany)<\/p>\n<\/div>\n

Further information:<\/h2>\n