Gas Engine TCG 2032

3,000 - 4,500 kWel

High reliability. Low operating costs. Mainly used in large IPP projects, up to 100 MWel.

  • Output range from 3,000 to 4,500 kWel
  • Runs on all gas types
  • Also available with fast ramp-up option for the gas engine TCG 2032B V16

MWM TCG 2032 V12, V16 Gas Engine – High Reliability. Low Operating Costs.

Compelling Arguments – Features at a Glance.

  • Output range from 3,000 to 4,500 kWel
  • Runs on all gas types: natural gas, landfill gas, sewage gas, mine gas, coke oven gas, biogas(1)
  • Mainly used in large IPP projects with up to 100,000 kWel
  • The series features superb reliability and low operating and maintenance costs.
  • High reliability
  • Low operating costs
  • Also available with fast ramp-up option for the gas engine TCG 2032B V16
  • More than 740 power generators with approximately 2,850,000 kWel already installed around the globe

(1)TCG 2032 V12 gas engine not available for biogas.

The MWM gas engines of the TCG 2032 series are perfectly geared to the challenges of a dynamic market environment. In the power range of 3,000 – 4,500 kWel reliability, flexibility, efficiency and environmental compatibility are ensured along with low life-cycle costs. In this way, they meet the high requirements of a wide range of applications and are highly profitable.

MWM Gas Engine TCG 2032B V16 with Fast Ramp-Up Option

  • TCG 2032B V16: 4.5MWel gas engine for a quick start
  • The feature of a fast ramp-up start is becoming increasingly important due to growing intermittent renewable capacity such as wind and solar
  • The MWM TCG 2032B(2) gas engine has a software option for a fast ramp-up start. This option allows to switch between normal and fast start requirement for each start request
  • A fast start is a start in less than five minutes from start request to 100% load on the grid

(2) Available for all TCG 2032B V16 standard voltages 6000 V to 11 kV @50Hz, only for natural gas.

High Reliability. Low Operating Costs – MWM Gas Engine TCG 2032.

High Efficiency and Low Lubricant Consumption

  • High fuel utilization and low operation costs thanks to optimized chamber spark plug
  • Increased efficiency through new closed crankcase ventilation that enables utilization of the blow-by gas
  • High availability through long maintenance intervals: first maintenance after 4,000 h, major overhaul after 80,000 h
  • With its lubricant consumption of only 0.2 g/kWh up to 30 percent lower lubricant consumption compared to competitor products thanks to optimized tappet sealing, coke stripping rings and ring packages

Soot-Free Combustion Increases Plant Profitability

  • Open combustion chamber with chamber spark plug for soot-free combustion
  • Extended maintenance intervals for the exhaust gas heat exchanger
  • No pre-combustion chamber with time-consuming maintenance and risk of failure
  • No additional gas supply with increased gas pressure required for pre-combustion chamber

Few Interruptions Due to Long Maintenance Intervals

  • No more than two interruptions a year due to scheduled maintenance
  • Longest interval until major overhaul compared to competitors
  • Use of Xchange components enables time savings of up to 75 percent during the major overhaul, resulting in reduced costs

High Availability – MWM Gas Engine TCG 2032

New Turbocharger Technology Increases Genset Availability

  • Improved output under non-ISO conditions
  • High output of 4,500 kWel possible through use of A140 high-pressure turbocharger
  • Turbocharger achieves higher compression ratio and enables operation under full load with intake air of up to 45°C
  • Exhaust gas waste gate enables constant performance with different intake air temperatures and setup altitudes
  • Evening out of reserve boost pressure in relation to load results in higher efficiency and improved load response

Low Installation Costs – MWM Gas Engine TCG 2032

Compact Engine Design for Easy Transport and Installation

  • Extremely lean genset with compact dimensions, low noise emissions, and smooth running guarantees minimum installation costs
  • Compared to competitors, the specific output/weight ratio is up to 40 percent better
  • Lighter engine components eliminate need for strong crane
  • Compared to competitors, TCG 2032 V16 is up to 30 percent shorter in length
  • Low weight and compact dimensions enable easy transport even to remote destinations

Short Project Period – MWM Gas Engine TCG 2032

Short Project Period Thanks to Compact Setup

  • Pre-manufactured components directly from the manufacturer ensure quick and easy assembly on site
  • Identical setup of the individual modules facilitates flexible adjustment of the plant output
  • Modest need for space through compact design
  • Plant planning and building from one source guarantees smooth, cost-efficient project rollout

Lower Service Costs – MWM Gas Engine TCG 2032

Low Service Costs and a Lean Maintenance Concept

  • Enhanced maintenance concept through easy access to the cylinder units
  • Long service intervals and improved serviceability
  • Low maintenance costs due to fewer engine parts, resulting in low maintenance overhead and spare parts requirement
  • Lower maintenance overhead through open combustion chamber with pre-combustion chamber spark plug

Performance Data – MWM Gas Engine TCG 2032

Natural Gas Applications, NOx ≤ 500 mg/Nm3 *

TCG 2032 V12
R = Optimized for high total efficiency
Engine type50 Hz60 Hz**
Electrical outputkW33333000
Mean effective pressurebar20.020.1
Thermal output ± 8%kW28622539
Electrical efficiency%43.943.9
Thermal efficiency%42.642.1
Total efficiency%86.586.0
Power to heat ratio***1.031.04
TCG 2032 V16
R = Optimized for high total efficiency
TCG 2032B V16
R = Optimized for high total efficiency
Engine type50 Hz60 Hz**50 Hz60 Hz**
Electrical outputkW4300400045004050
Mean effective pressurebar19.420.220.320.4
Thermal output ± 8%kW3698341136683252
Electrical efficiency%44.143.844.644.3
Thermal efficiency%42.742.443.142.6
Total efficiency%86.886.287.786.9
Power to heat ratio***1.031.031.031.04

* 5% O2 and dry exhaust gases
** On request
*** The power to heat ratio is calculated by dividing the electrical efficiency by the thermal efficiency. Please remember that this is a theoretical value that may deviate from actually measured values.

Biogas, Landfill Gas, and Sewage Gas Applications, NOx ≤ 500 mg/Nm3 *

TCG 2032 V16
X = Optimized for operation with biogases
Engine type50 Hz60 Hz**
Electrical outputkW37703510
Mean effective pressurebar17.017.0
Thermal output ± 8%kW31962880
Electrical efficiency%43.043.3
Thermal efficiency%41.940.6
Total efficiency%84.983.9
Power to heat ratio***1.031.07

* 5% O2 and dry exhaust gases
** On request
*** The power to heat ratio is calculated by dividing the electrical efficiency by the thermal efficiency. Please remember that this is a theoretical value that may deviate from actually measured values.

Specifications and Service Intervals – MWM Gas Engine TCG 2032

Dimensions and Weights

TCG 2032 V12TCG 2032 V16
Engine type50 Hz60 Hz*50 Hz60 Hz*
Lengthmm7860800092719420
Widthmm2660279027902790
Heightmm3390339033903390
Dry weight gensetkg43100406505120052400
Bore / strokemm260/320260/320260/320260/320

* On request

Service Intervals

First service (check valve clearance)*Mixture cooler cleaningCylinder head inspectionMajor overhaul
Natural gas4,000 oh20,000 oh40,000 oh80,000 oh

* “after commissioning (E10)”

Brochure – MWM Gas Engine TCG 2032

Here you will find complete information about gas engines in the TCG 2032 series. Like all MWM power generators, these gas engines run on various types of fuels and are capable of effectively utilizing exhaust heat through cogeneration.

Click this brochure to access the digital publishing platform issuu.com. This website is governed by the issuu Privacy Policy.

All languages on issuu: DE | EN | FR | RU | ES | NL | CN
Download PDF: DE | EN | FR | RU | ES | NL | CN

MWM Premium Antifreeze -20

MWM Premium Antifreeze -20

High-performance coolant for MWM diesel and gas engines.

Read more
MWM Gas Engine Premium Oil

MWM Gas Engine Premium Oil

Test MWM Premium oil for gas engines.

Read more
MWM Spare parts

MWM Spare parts

With its logistics center in Lorsch, Germany, MWM guarantees efficient and reliable global spare-part supply.

Read more
MWM Remote Asset Monitoring

MWM Remote Asset Monitoring

Everything under control: More transparency and value for CHP plants with MWM Remote Asset Monitoring (RAM).

Read more

Gas engines & Products

Gas Engine TCG 3016

New development – greatly reduced operating and installation costs and fully digitized power plant control.

Read more
MWM TCG 3020 V20

Gas Engine TCG 3020

The All-Round Talent. Smart, secure plant control. Higher output and profitability despite compact design.

Read more